ESI - Energy Saving Innovation Controls ESRTP5WIFI 5 Series WiFi Programmable Room Thermostat, White

Product Information

I used the Drayton Wiser system at the old house and got on with it ok, actually brought it with me thinking it might be useful. If you do not give permission you may continue to use this site and only essential cookies will be set. Use a flat headed screwdriver to press the fastener at the top of the unit, then gently loosen from the unit, unhooking from top to bottom.

SWITCH OFF MAINS BEFORE FITTING BACK PLATE AS LIVE AND NEUTRAL CONTACTS MAY TOUCH WHILE MOUNTING RECEIVER ON PLATE AND DAMAGE THE PRODUCT. Changing to hive or tado or something else might be the answer, but if I can get the basic functionality needed just with a different model of what I've got then I hope that'll be simpler. above floor level, in a location where the thermostat is accessible, reasonably lit and free from extremes of temperature and draughts. It is designed for time and temperature control of your heating and comes with 7 day, 5/2 or 24 hour programming options all in one unit with a factory-set programme which can be user modified. Some cookies are essential to the functioning of this site whereas others are non-essential but help us provide a better browsing experience.

It works 100% reliably and I'm now quite used to be able to control hot water and CH remotely from my phone. The ESRTP5WIFI is ESI's top of the range Programmable Room Thermostat, providing seamless control at home or from your mobile phone or tablet. Users can boost heating for up to six hours and choose between TPI and Delayed Start energy saving features. Local deliveries to the following postcode areas: AL, CR, DA, E, EC, EN, HA, HP, IG, N, NW, RM, SG, SL, SM, SW, SE, W, WC, WD.

The unit must be installed by a suitably qualified person in accordance with the latest IEE Wiring Regulations.

The ESRTP5WIFI is our top of the range Programmable Room Thermostat providing seamless control at home or from your mobile phone or tablet. Just moved into a new build and I'm trying to learn a bit more about the controls for the central heating. I have no familiarity with the mounting backplate of these things, it's it a standard that's shared across platforms?

Helpfully, the developer gave us absolutely no info on the controls so I've had to do a bit digging myself.The ESi Controls range of programmable room thermostats are quick to install, easy to use and packed with energy saving, sophisticated features that give high levels of control and comfort for the homeowner. Users can boost heating for up to six hours and choose between TPI and Delayed Start energy-saving features. The unit is provided with a copy function which allows an adjusted programme to be copied to another day.

We deliver via courier to other areas of the UK excluding the Scottish Highlands, Northern Ireland and the Isles of Scilly. THIS PRODUCT MUST BE FITTED BY A COMPETENT PERSON, AND INSTALLATION MUST COMPLY WITH THE GUIDANCE PROVIDED IN THE CURRENT EDITIONS OF BS767 (IEE WIRING REGULATIONS) AND PART “P” OF THE BUILDING REGULA-TIONS. It sounds like your old stat didn’t need a neutral , and the new one does, you didn’t mention the switch live ? Key lesson for me was the connectivity back to the router and the short range requiring the (dedicated) signal booster.I work away from home a lot so would definitely be interest in a straight swap for something more WiFi enable to control remotely. Your thermostat should now be connected to your WiFi and the symbol on your thermostat should be constantly on. And if I use the 2 existing wires to ports NC and NO should work and fires the boiler just like the old one, but it don't. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable).