Joined in 2023 
82 
63 About this deal
Step 4. Now that I worked out how to install the air cooler, it was a breeze installing it in my pc case (Phanteks Enthoo Primo). A lot of folks said you need to take your mobo out of the case when installing this air cooler, otherwise it is a massive headache. In my experience, this was not true because I did a dry run installation and my pc case has huge internal space. I use Shinetsu X-23 TIM and once applied to the heatsink (one line on each heat pipe), it was installed. I then fitted my pair of Noctua NF12 fans (hassle free). TBH, the end result is not the prettiest sight but in this case, I care more about cooling performance rather than aesthetics (as this cooler utilises a single heatsink and not two). Step 6. Use my pc as normal. See idle and gaming temps. Tings get interesting!. In this warm weather, the single heatsink AF34ESD gives the same cooling performance as my Cryorig R1 Ultimate (dual heatsink) air cooler at idle (38c to 43c). During 4K gaming, this AF34ESD actually beats my CR1U by circa 3c and my 5800X does not go above 46c. My Noctua NF12 fans are powerful and together produce 220cfm but on the downside they can get a bit noisy, but IMO the cooling performance versus audio levels is a good trade off.
The ARCTIC Freezer 34 eSports DUO may not be the "best" of any one category specifically, but at the same time, ARCTIC has found the right solution to the formula of appealing to the masses for any condition, and we feel they did just that and did it well. The build quality of the cooler is really purely function oriented. The endings of the heatpipes at the top of the fin bundle are not covered in any way and the manufacturer’s logo is subtly embossed into the upper fin of the heatsink. Mounting of the fan is performed by means of clips, which are inserted into small holes through the bundle of fins. Therefore, there is no bending or abrasion of the edges of the fins when installing the fan, but the clips are unfortunately quite soft and easily deformed. Here I would appreciate the use of better quality metal that would hold its shape better.
Recommended Products
Something else to consider in this formula as well, and that is the noise coming from the fans when accomplishing thermal improvement. To gain a degree, usually sound levels have to climb, or a larger fan is used while maintaining similar values. However, Somehow, ARCTIC was able to do both at once, lower the temperature, and lower the noise levels.
To conclude, I have used Arctic Freezer air coolers before and I thought the AF-A30 was a good air cooler which I used on my old AM3+/FX8350 rig, but this AF34ESD is in a league of it's own, as my modified version can take down big boy, dual heatsink air coolers. Honestly, AF have done an amazing job with this one. I am going to keep this air cooler due to the amazing cooling performance AND it also has a 10 years warranty. The Freezer 34 CO differs from the Freezer 34 only by the addition of a high-precision and extremely durable dual ball bearing, which was specially developed for continuous operation. While many may balk at the single-degree performance gains over the predecessor, it is more about what coolers it is directly competing with. While the thermal results may look bad on the chart as they tend to fall to the bottom, but when you look deeper and see the Freezer 34 eSports DUO competing with AIOs at a third the cost, it changes one's perspective.Once there, we see the fans are rated for 67.56CFM with 2.75mmH20 of pressure per fan, at maximum RPM. As for noise, the tower is rated at 0.5 Sone, which translates to roughly 25 or 26 dB(A). Looking at the fans specifications chart, ARTIC says there that they are rated at 28 dB(A). The last thing to mention, and an important note to many potential customers, is the mention of the ten-year warranty, which is one of the best in the game right now. ARCTIC today introduced the new Freezer 34 air cooler series. Development of the new Freezer series focused on increasing cooling capacity. With static pressure optimized P-fans and the improved heatsink, the Freezer 34 series offers high quality products with high-powered performance. The series consists of the standard Freezer 34 model; the Freezer 34 CO, a new tower CPU cooler; the Freezer 34 eSports; and the Freezer 34 eSports DUO. The choice of fans has changed from the Freezer 33 to Freezer 34. Rather than opting to keep the 1800 RPM BioniX F120 fans, for the Freezer 34 eSports DUO, we see ARCTIC moved to a higher speed, BioniX P120 fans to flank this tower. Each fan is capable of speeds ranging from 200 to 2100 RPM this time, but all of the technical specs need to be found in the case fan category, by finding the BioniX P120 fans. The only issue I found with the CR1U is that the front fan conflicts with my tall RAM module, so I had to offset the height of the front fan by mounting it about 1.5cm higher (which looked weird and probably affected cooling performance).
Related:
Great Deal 
New Comment